Bendigo Creek - LiDAR
dataset
Dataset: Bendigo Creek - LiDAR
Assembly: Single
|
Citation proposal Citation proposal
Bendigo Creek - LiDAR https://uat-metashare.maps.vic.gov.au/geonetwork/srv/eng/catalog.search#/metadata/45b1078a-848a-5da1-8ac8-b75036026453 |
Details
Contacts
Point of contact
Identifiers and Keywords
- ANZLIC Id
- ANZVI0008102836
- Topic category
-
- Elevation
Resource Constraints
- Use limitation
- General
- Classification
- Unclassified
Other Dataset Details
- Format
- LAS 1.2
Spatial
- Spatial representation type
- Point Cloud
- Reference system identifier
- MGA Zone 55 GDA94
Resolution
- Horizontal Accuracy
- 0.2m
- Vertical Accuracy
- 0.1m
Quality
- Conceptual Consistency
- Accuracy of the ground surface under dense canopy may be reduced. Laser accuracy at swath edges may be reduced. There is no difference in the processing of returns over water and over land.
- Missing Data
- Gaps in the point cloud may have occurred due to gate range restrictions over areas with large terrain elevation differences. These were reflown to ensure full coverage. Gaps may occur due to diminished returns over water and materials with low laser reflectivity, such as black composite roofing.
Lineage
- Description
- LiDAR was acquired in ellipsoid co-ordinates by logging against a position solution obtained from the onboard IMU and GPS and the Victorian CORS network. The LiDAR was then checked against an ellipsoid control composed of surveyed ground control points and adjusted if required. The ellipsoid co-ordinates were then reduced to AHD using AusGeoid09 (Beta 7 and V1.01). Checks against AHD control resulted in a further general and local adjustments where required. An automated algorithm, tailored to the project, was used to classify ground and non ground returns. The results were manually checked using intensity imagery and the algorithm adjusted and the process reiterated until a clean ground surface was produced. Points more than 30cm above the classified ground surface are classified as non ground.
Text
No information provided.
Acquisition Date
- Begin date
- 2012-03-06
- End date
- 2012-03-06
Instrument
- Name
- Leica ALS50-II
- Type
- LIDAR
- Platform Type
- Aerial
Acquisition Data (Common)
- Status
- complete
- Assembly
- Single
- Tile Size
- 1 km
Point Cloud Details
- Scan Rate (Hz)
- 37Hz
Measure
No information provided.
- Footprint Size (m)
- 0.36000001m
- Point Density Actual (pts/m2)
- 2points/m2
Measure
No information provided.
- Ellipsoid Provided
- 0
Aerial Survey Details
- Run Orientation
- Not Entered
- Flying Height Unit
- Not Entered
About the Metadata Record
- Metadata identifier
- 45b1078a-848a-5da1-8ac8-b75036026453
Contact
No information provided.
- Resource Type
- Dataset
- Date info ( Revision )
- 2023-03-22T00:22:23
- Standard Name
- ISO 19115-3:2018
- Profile Name
- DELWP Profile
- Profile Version
- Version 1
- Profile Date
- 2019-05-24
Metadata Constraints
- Classification
- Unclassified
Overviews
Provided by
Views Views
45b1078a-848a-5da1-8ac8-b75036026453
Access to the portal Access to the portal
Read here the full details and access to the data. Read here the full details and access to the data.
Associated resources
Not available